Where It Works
Grass Fence Rolls on Wood Fences
Turn a weathered wood fence into a dense green hedge in an afternoon. Dolce Green rolls staple straight onto your existing boards and frame, so there is no demolition, no new posts and no painting or staining ever again.
Why It Works
Why it works on wood
Wood is the easiest surface to cover. The roll sits flat against the boards and the staples go straight through the galvanized wire core into the wood.
Hides worn, gray or patched boards
Covers stains, mismatched replacement boards and peeling paint without sanding, painting or staining.
No more refinishing
The UV-protected PVC blades stay green, so the fence no longer needs a new coat of stain every few years.
Works on any wood style
Board-on-board, shadowbox, picket backed with boards, horizontal slat or lattice, as long as there is solid wood to staple into.
Fast, low-cost install
A heavy-duty staple gun is the main tool. Most residential runs are covered in a day.
Installation
How to install
Do it yourself with basic tools, or have our team install it for you in South Florida.
Step 01
Check the fence
Make sure posts are solid and boards are not rotted or loose. Replace any broken boards first; the roll covers wood, it does not hold it together.
Step 02
Measure and unroll
Measure the height and length of each run. Unroll the grass fence along the fence line with the leaves facing out.
Step 03
Staple along the top
Start at one end post. Staple through the wire core along the top edge, keeping the roll level and pulled snug.
Step 04
Finish and trim
Staple down the sides, middle and bottom, then trim excess at the ends and around gates. Fluff the leaves to hide the staples.
What you need
- Heavy-duty manual or pneumatic staple gun
- Galvanized or stainless staples (rust-resistant)
- Wire cutters or heavy shears for trimming the roll
- Gloves, tape measure and a ladder for 6 ft fences
Good to know
- Staple over the wire core, not just the plastic leaves, so the roll holds in wind.
- Rotted or leaning sections should be repaired before installing.
- Staples come out easily, so the roll can be removed later without damaging the boards.
South Florida Installation
Grass Fence Installation on Wood Fences in South Florida
Across Miami-Dade, Broward and Palm Beach, wood fences go gray, warp and need new stain every few Florida summers. Our crew covers them in place, from Pinecrest, Kendall and Coral Gables to Weston, Davie and Boca Raton, so you get a green privacy wall without tearing out a single board.
Our crew installs in:
Outside these counties, we ship rolls across the East Coast and central U.S. for DIY or contractor installs.
Before you call: see the roll sizes and specs, browse finished projects in the gallery, or watch an install on our videos page.
We also cover chain-link fences · iron & aluminum fences · concrete & masonry walls.
Common questions
Will staples damage my wood fence?
Staples leave only small holes in the boards and are hidden by the leaves. If the roll is ever removed, the holes are barely visible.
Can I install it on just one side of the fence?
Yes. Most customers cover the side facing their yard or pool. The other side stays as it is unless you choose to cover both.
Ready to cover your wood fence?
Send us the length and height of your fence for a quote on rolls or installation.
Other surfaces: Chain-Link Fence · Iron / Aluminum Fence · Concrete / Masonry Walls